Adjusts, Removes & Installs Sights Without Damage
Safely moves fixed sights right or left in their dovetails without deforming slide or sight. Specifically designed for use with factory and aftermarket Tritium night sights, which are too fragile for the traditional hammer-and-punch sight installation method; works equally well with iron sights. Thumbscrew securely locks the slide so it’s fully supported in the rigid, machined aluminum body. Separate slots in the screw mechanism engage the sight and firmly, yet gently, concentrate screw force to loosen sights from even extremely tight dovetails. Hardened steel handle provides plenty of leverage, while self-lubricating, oil-impregnated Oilite® bronze bearings and extra-fine threads ensure smooth, precise movement. Beretta/Glock fit rear sights only. Glock Flat-Side fits aftermarket rear sights with straight, non-sloped sides for standard- and large-frame Glock pistols. SIG fits rear sights on all SIGs except SIG-PRO. Smith & Wesson M&P fits both and front and rear sights; will not fit Pro models with 5" barrel. Will not fit the Shield model. Smith & Wesson M&P Shield now fits 9,40, & 45 models. Springfield XD fits both front and rear sights on all XD models except front sight on 5" barrel Tactical model. These do not work on the front sights of Pro/Tactical or sub compact XD/XDM model front sights. Will not work on XD-S slides. 1911 will not work with most Kimber slide/sight combinations. Only works on rear sights. Not for installing or adjusting front sights. Sig fits P220, P225, P226, P228, P239 only. Does not fit Sig Pro series. Does not fit P220 Elite Shadow. Does not work on adjustable sights.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H. The use of Glock on this page is merely to advertise the sale of Glock parts or components. As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.
1911, Issue:11, Page:061
Big Book Catalog, Issue:71, Page:151
Big Book Catalog, Issue:71, Page:477
SPECS: Aluminum body, anodized. Steel cross carriage bolt and thumbscrew, black oxide finish. Beretta/Glock - 4¾” (12.1cm) wide, 3” (7.6cm) high, ¾” (19mm) thick. Glock Flat Side - 4¾" (12.1cm) wide, 2½" (6.4cm) high, 1¼" (3.2cm) thick. SIG - 4¾” wide, 5” (12.7cm) high, 1” (2.5cm) thick. Smith & Wesson M&P and Springfield XD - 4¾” (12.1cm) wide, 3-5⁄8" (9.2cm) high, 1-5⁄8" (4.1cm) thick; fits front and rear sights. M&P will not fit Pro models with 5" barrel. 1911 will not work with most Kimber slide/sight combinations.
Models For A1 & A2 Make Sight Adjusting Quick & Easy
Even tho' you're supposed to be able to adjust these sights with nothing more than a round of ammo, folks who've tried know it's just not that simple. This decidedly handy little Sight Wrench does the job, quick and easy.
AR-15, Issue:11, Page:082
AR-15, Issue:11, Page:083
AR-15, Issue:11, Page:085
Big Book Catalog, Issue:71, Page:084
Big Book Catalog, Issue:71, Page:085
Big Book Catalog, Issue:71, Page:087
All Steel, Adjusts Windage & Elevation
Precision machined, all steel C-clamp easily adjusts front sight windage and elevation on most AK-47 and SKS variants. Threaded T-handle provides the force needed to move even stubborn front sights. Opposite end of T-handle fits elevation post. Made in the U.S.A.
Big Book Catalog, Issue:71, Page:468
- For AK-47 and SKS rifles with standard sights
- Precision made for ease of use
- Rear sight installation and removal tool
- One tool per package
Just try to install or remove the rear sight on an AK-47 rifle without making your thumb bleed. The next time you install or remove the AK-47 rear sight, do it with the Power Custom AK47 Campy Bob Sight Tool. Each tool is manufactured out of the finest materials for a long working life and for ease of use. It makes rear sight changes to your AK-47 rifle painless.
SPECS: For AK-47 and SKS rifles.
Made to fit the front sight post of the SLR, SAM, and all other rifles and pistols of the same platform, this precision tool is divided into 32 micrometer numbers and is strategically marked for better visibility and adjustment. It comes complete with a step-by-step operators manual.
This Front Sight Post Adjustment Tool, once available only to the military (Arsenal, Incs Military CAGE Code 4UBG6), is now available to sell to the public as part# AA1401A.
This AK elevation wrench is made of heavy duty, solid tooling stainless steel that has been heat treated and chrome plated to insure that its lifetime warranty is never used. With the protective chrome finish, it is designed to work and survive in the harshest environments. Born out of necessity for the military, this tool is able to accomplish its mission, where competitors products fail and either break themselves or break the weapons they are being used on. Fully indexed for micro-elevation adjustments, this precision tool comes complete with an instruction manual, detailing use on most AKs and a test target for zeroing applications. The instruction manual has easy to read step-by-step instructions, illustrated samples, and tables to follow to help you assist in a zeroing procedure.
The White Oak Armament hood tool is used to tighten and loosen the rear hooded apertures on your service rifle. No more fiddling with a dime to catch the grooves or sore fingers trying to get a grip on the hood. This tool slips over the hood, then the wing nut tightens it around the hood, simply turn the tool to break it loose or snug it in.
The red color will help you find when it falls on the ground or is lost in the bottom of your bag.