If you find product , Deals.If at the time will discount more Savings So you already decide you want have Sig Sauer Tru-Dot® Adjustable Tritium Night Sight Sets Meprolight for your, but you don't know where to get the best price for this Sig Sauer Tru-Dot® Adjustable Tritium Night Sight Sets Meprolight . We already done the research and spend a lot of time for you. Sig Sauer Tru-Dot® Adjustable Tritium Night Sight Sets Meprolight to find out where to get the best deal on Sig Sauer Tru-Dot® Adjustable Tritium Night Sight Sets Meprolight.

Content:
Sig Sauer Tru-Dot® Adjustable Tritium Night Sight Sets Meprolight. Really "shines" when other sights are useless. No switch to turn on, no batteries to wear out. Both front and rear blades ...
Sig Sauer Tru-Dot® Adjustable Tritium Night Sight Sets Meprolight. by admin www.brownells.com

Really "shines" when other sights are useless. No switch to turn on, no batteries to wear out. Both front and rear blades have their own green tritium gas light source and provide a green/green , 3-dot sight picture. Some models also available in green/yellow and green/orange. The front sight is always green for contrast with the rear sight. Unaffected by weather, gun solvents or oils. Used by NATO, U.S., and Israeli armies. Also ideal for law enforcement and others requiring accuracy in low-light conditions. Contains both front and rear sights. Rear sights either replace the original rear entirely or, as on S&W revolvers, a new rear leaf, screw and nut are provided. Front sights either replace the original (1911 Auto); slip over and are pinned to the original blade (most other autos); or replace the factory colored insert (S&W Autos). Factory warranty on TRU-DOT sights to the original purchaser for 12 years.


Big Book Catalog, Issue:71, Page:321


Ar-15 Upper Receiver Assembly 16" 5.56 Midwest Industries, Inc.. The Midwest Industries Complete 16" 5.56 Upper Receiver Assembly is ready to install on the mil-spec lower of your choice. Chambered in ...
Ar-15 Upper Receiver Assembly 16" 5.56 Midwest Industries, Inc.. by admin www.brownells.com

Drop-In Ready For Completing a New AR-15 or Upgrading an Old One

The Midwest Industries Complete 16" 5.56 Upper Receiver Assembly is ready to install on the mil-spec lower of your choice. Chambered in .223 Wylde, this rifle is ready to shoot military-type 5.56x45mm ammo or civilian .223 Remington with equal accuracy. The "pencil"-profile barrel won't weigh you down.

The Midwest Industries Complete 16" 5.56 Upper Receiver Assembly comes with MI’s own lightweight, free float, M-LOK G3 handguard. It sports a two-port muzzle brake mounted on the ½100-023-932-28 threaded muzzle.

  • 12.6" M-LOK handguard for plenty of accessory-mounting versatility
  • 7075 T6 forged aluminum upper receiver
  • M4-type feed ramps
  • Mid-length gas system
  • Versatible 1-8" rifling stabilizes a broad range of bullet weights

The Complete 16" 5.56 Upper Receiver Assembly from Midwest Industries does not come with a bolt carrier group or a charging handle, so you can choose these critical components suited to your specific needs


M1 Lightweight 16.5in 45 Acp Blue 30+1rd Auto Ordnance. Here is a .45 caliber semi-automatic version of the world's first and most famous military rifle. The Thompson M1 was used victoriously in ...
M1 Lightweight 16.5in 45 Acp Blue 30+1rd Auto Ordnance. by admin www.brownells.com

Here is a .45 caliber semi-automatic version of the world's first and most famous military rifle. The Thompson M1 was used victoriously in battles throughout the world, inscribing its place for all times as a legend among military firearms. We offer the same attention to craftsmanship today that made the original so highly regarded. The look and feel are authentic, right down to the side bolt action. The frame and receiver are milled from solid steel or aluminum, the wood is genuine American walnut and the overall finish is a blued steel or black anodized aluminum


Mp5sd Barrel 9mm 5.74" Rim Country Manufacturing Inc. These new production RCM MP55D barrels are machined from a cold hammer forged blank and are the highest quality US made MP5SD ...
Mp5sd Barrel 9mm 5.74" Rim Country Manufacturing Inc. by admin www.brownells.com

Hammer Forged MP5SD Barrel That's Suppressor Exclusive

These new production RCM MP55D barrels are machined from a cold hammer forged blank and are the highest quality US made MP5SD barrels available. Barrels are treated with a black nitride finish for superior corrosion resistance and hardness.  

BCM ensures these barrels are made to exacting HK specifications, including a 16 flute chamber.  

This barrel is intended to be used in conjunction with a MP5SD suppressor.  Do not fire without suppressor installed.

  • Cold hammer forged steel
  • Black nitride finish
  • 9x19mm chambering
  • 5.74” length
  • Chamber has 16 flutes for optimum extraction

Get the best quality barrel for your MP5SD from RCM.


Big Book Catalog, Issue:71, Page:171


Tyr Trigger Shoe For Glock® Ssvi. The SSVI Tyr trigger was designed from the ground up to be the next evolution in an EDC/Duty trigger, refining what we ...
Tyr Trigger Shoe For Glock® Ssvi. by admin www.brownells.com

The SSVI Tyr trigger was designed from the ground up to be the next evolution in an EDC/Duty trigger, refining what we know and love about the predictability of the OEM Glock tirgger. It maintains all current safeties built into the Glock Safe Action system, and increased the leverage used when actuatiing the trigger to enhance the user experience.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H. The use of Glock on this page is merely to advertise the sale of Glock parts or components. As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.


Ar-15/m16 30rd Magazine Body Brownells. High capacity Magazine Bodies available in 30-Round.
Ar-15/m16 30rd Magazine Body Brownells. by admin www.brownells.com

High capacity Magazine Bodies available in 30-Round.


AR-15, Issue:11, Page:062
Big Book Catalog, Issue:71, Page:069


Pocket Protector Holsters Galco International. The Pocket Protector™ holster is designed for front pocket carry in pants or a jacket. The Pocket Protector keeps the firearm in ...
Pocket Protector Holsters Galco International. by admin www.brownells.com

The Pocket Protector™ holster is designed for front pocket carry in pants or a jacket. The Pocket Protector keeps the firearm in the same general position so you can quickly locate the grip when you need to draw, conceals the shape of the gun so that its outline is not printed through the pants, and allows one-handed release of gun from both pocket and holster. Reinforcements at the holster mouth and beneath the trigger guard keep the holster stiff enough to allow a smooth draw and easy return to the holster, while also maintaining enough rigidity to prevent “printing” and shifting of the handgun. The holster’s hooked shape – at the base of the handgun’s trigger guard – is designed to catch on the pocket so that, with practice (using an unloaded firearm) and while using the proper pants, you can draw the firearm while the holster remains in your pocket or falls away. The Pocket Protector is ambidextrous and constructed of premium Center Cut Steerhide™. The holster should always be removed from the pocket when holstering the handgun.


Big Book Catalog, Issue:68, Page:251

SPECS: Center Cut Steerhide.


Shotgun Magazine Tube Cap With Swivel Base Outdoor Connection. Machined steel magazine cap with built-in, 360° rotating swivel stud makes it easy to convert your Remington shotgun to accept a carry sling. ...
Shotgun Magazine Tube Cap With Swivel Base Outdoor Connection. by admin www.brownells.com

Installs Easily For Instant Sling Attachment

Machined steel magazine cap with built-in, 360° rotating swivel stud makes it easy to convert your Remington shotgun to accept a carry sling. Unique cap design includes both ratchet and ball/spring type detent systems for no-hassle installation. Includes a ¾" long, wood screw swivel stud for the buttstock. Sling loops not included. Installation requires drilling of buttstock.


Big Book Catalog, Issue:71, Page:250

SPECS: Steel, black, matte finish. Includes magazine cap with swivel stud, wood screw stud w/black spacer, and instructions. Models available for Remington 870/1100/11-87/11-96, 12 ga. only and Mossberg 500 and Maverick 88, 20 ga. & 12 ga. Moss/Mav includes spanner wrench.