“Ounces are pounds, Pounds are pain” The credo of the backcountry hunter. When tired legs are the only mode of transportation. When the air feels thin, and feet feel heavy. When months of preparation, training and sleepless nights thinking about the upcoming hunt culminate into a single moment, placing the crosshair where it needs to be for the perfect shot. Warne Mountain Tech is the ultimate lightweight precision scope mounting system. Don’t leave your dream hunt to chance. When every ounce matters, and every shot counts, Warne Mountain Tech are the scope mounts you can depend on.
- Precision CNC machined from 7075/T6 aluminum for a high strength & lightweight platform
- Mil-Spec hardcoat anodized finish for abrasion and corrosion resistance.
- Rings feature stainless steel hardware for “Element Proof” protection.
- Mil-Spec 65 in/lb., 1/2″ tactical nut attachments for securely clamping to the rail.
- Fits Picatinny & Weaver style mounts and are NATO-STANAG compatible.
The Nightforce X-Treme Duty Ultralite Unimount is designed to remain on the scope at all times, allowing quick removal of the scope or interfacing with different firearms. It is the most accurate Picatinny mount available, designed to maximize long-range capability.
The Nightforce X-Treme Duty Ultralite Unimount is the ultimate mount for attaching to weapons with an integral picatinny flat top-type receiver. Precise tolerances ensure that the riflescope is not subjected to stress, strain or bending as the ring screws are tightened. The Unimount is finished with a matte-black coating.
- Fits 30mm scope tubes
- Height: 1.44 inches
- Features 20 MOA built-in elevation
- Machined from 7075-T6 aluminum
This model of the Nightforce X-Treme Duty Ultralite Unimount is designed specifically to provide a "nose to charging handle" style shooting position which preferred by most service rifle shooters.
Promotional Codes are not applicable to Nightforce products.
Billet Machined For Strength; Dual Recoil Lugs Stay Put
Heavy-duty scope rings are precision-machined from solid billet aluminum with dual recoil lugs to ensure your tactical scope won’t budge under the heaviest recoil. Full-width ring caps are cut from the same billet as the bottom half of the ring for precise fit and held in place with four stainless steel Allen head screws that won’t work loose when properly tightened. Matching serial numbers ensure you always mate the cap with the bottom it came with. Locking bar, heavy-duty crossbolt and oversized, ½" hex nut locks the ring to any MIL-STD 1913 Picatinny rail. Hard-anodized for extra surface strength, with a non-reflective matte black finish. Engraved front and back with the distinctive Talley cross-bones logo.
Big Book Catalog, Issue:71, Page:268
SPECS: 7075 T6 aluminum, hardcoat anodized, matte black, with 303 stainless steel screws, black finish. 1.9" (5cm) wide, .665" (16.8mm) thick. Models available for 1" (2.5cm) or 30mm O.D. scope tubes. Heights measured from top of base to center of ring: Low - 1" (2.5cm); High - 1.275 (3.2cm).
The Edge rings from Morr Accuracy feature strength with light weight. Finite element analysis ensures regidity where you need it and no extra weight where you don't. Available in 1" and 30mm tubes, straight or offset, and mount to either 11mm or 3/8" rails. The Edge 4 Screw rings are designed for centerfire benchrest shooters and utilize 4 screw ring caps. Average weight is 1.5oz. per pair for the Edge and 2.7 oz. per pair for the 4 screw models.
Sinclair, Issue:5B, Page:206
SPECS: Edge Rings: 1.45" Tall, from top of rail to center of ring. Edge Tall: 1.55" from top of rail to center of ring Edge Low: 1.15" from top of rail to center of ring. Edge Offset are .5" from center of action.
Low Profile & High Strength
Vertically split, low-profile rings clamp to MIL-STD 1913 Picatinny rails or Weaver-style bases and provide an eye-pleasing, streamlined look without compromising strength. Ring halves clamp together with four, steel Allen head screws for a tight hold on optic and rail. Steel cross-bar locks in the rail slot or base to prevent slippage under recoil. Available for 1" and 30mm diameter scope tubes.
Big Book Catalog, Issue:71, Page:262
SPECS: Aluminum, hardcoat anodized, matte black. Steel crossbar. Sold in pairs. Height measured from top of base to center of ring. 1" – .750" high. 30mm – .840" high.
The S-Series rings incorporate a square, stainless steel recoil control key in both the front and rear rings. This ensures a "no slip" positive recoil surface across the entire slot of the base that is capable of withstanding extreme recoil. The S-Series rings utilize four T-15 Torx-Style socket cap screws per ring for secure optics mounting for increased strength and riflescope alignment. The ring band width is also substantially wider than typical rings, offering more ring-to-scope clamping area to hold the riflescope firmly in place.
- High Quality Steel Construction with Matte Black Finish
- Fits all S-Series/Waever/Warne/Picatinny-style Bases
The Legacy rings from Morr Accuracy are robust in design and a great choide for the accomplished shooter. Available to fit 1 inch or 30mm tubes, and will mount to 11mm or 3/8" rails. Straight and offset options. All rings are in the raw.Average about 2.1 oz. per pair.
Sinclair, Issue:5B, Page:206
SPECS: Height: 1.3" from top of rail to center of ring. Offset rings are offset .25" from center line of action.