Precise Range Readings You Can Rely On
With the Vortex Impact 850 Laser Rangefinder in your hands, knowing the exact range to your target has never been easier! It precisely ranges reflective targets out to 850 yards, and a large game animals (such as a deer) from as close as 10 yards and as far as 400 yards. The Impact 850 rangefinder’s fully multicoated optics enhance light transmission for excellent performance in low-light, while the 6x magnification brings objects in closer so you can examine the details.
The Vortex Impact 850’s black LCD display boldly stands out against targets, and its fast-adjusting readout ensures you get range information in time to make the best use of it.
- Range readout can be set to yards or meters
- Diopter adjusts for precise focus
- Easy-to-use menu with simple, clean display
- O-ring seals keep moisture, dust, and dirt from getting inside the housing
- Powered by one readily available, long-lasting CR-2 battery
The Vortex Impact 850 Laser Rangefinder offers three helpful operating modes for different situations: Horizontal Component Distance (HCD) mode for angle-compensated ranging. The Line of Sight (LOS) mode displays actual line-of-sight range. And Scan mode displays continual distance readings when scanning across a landscape or tracking a moving animal.
Built for single-handed operation, the compact, ergonomic Vortex Impact 850 Laser Rangefinder fits conveniently in your pocket while the waterproof housing keeps you in the hunt regardless the weather.
Give Your Ruger Precision an Upgrade
The Criterion Ruger Precision Rifle 26-inch barrel enables users of the Ruger Precision Rifle to improve their gun's accuracy and overall performance by adding on a custom aftermarket barrel.
The Criterion Ruger Precision Rifle 26-inch barrel is available for rifles chambered in .308 Winchester and and features meticulous hand-lapping inside the bore for maximum quality.
- Built from 416R stainless steel
- Threaded muzzle measures 5/8-24 pitch
- Total twist rate of 1:10
The Criterion Ruger Precision Rifle 26-inch barrel can be ordered with either a Target contour or a Palma contour.
Hardened-Alloy Steel For Durability & Long Life
Specifically designed for durability and extra-long service life. EDM, wire cut, then CNC, finish machined from A-2 tool steel and hardened to Rc 48-52 so they hold a finely-stoned edge for thousands and thousands of rounds without failure. Pre-prepped hooks and sear face require only final stoning to achieve a clean, crisp trigger pull. Plus, the sear features the proper relief cut so the hammer resets firmly during cycling. All parts checked for proper hardness.
1911, Issue:11, Page:017
Big Book Catalog, Issue:71, Page:111
Sinclair, Issue:1A, Page:017
SPECS: A-2 tool steel, in-the-white or Stainless Steel, Rc 48-52.
Aircraft-grade aluminum adapter rail lets you use Picatinny scope 3/8" or European 11mm dovetail mounts found on many bolt-action rimfire rifles. Six crossbolts apply even pressure along length of dovetail to keep the adapter rail centered. Generous cross slots give you increased scope ring and optics choices, whether for weekend plinking or informal competition. Perfect for mounting a red dog sight. Clamping screws also fit into pre-drilled holes to equally spread the legs so you can easily slip the mount onto oversized rails. Extends approximately .620" above dovetail. 4" single rail weighs 3.1 oz. (g). Two 1" rail sections weigh .75 oz. (g) each. Hardcoat anodized, matte black finish.
Sinclair, Issue:5B, Page:207
- Drop in trigger for the FN SCAR-17S, 3.5lbs Non Adjustable
- Not for the 16S (use 883-000-043 for SCAR 16S)
- Stronger hammer spring for use with 308 ammunition
- Smooth, crisp, single-stage trigger pull
- Hammer is EDM machined from S7 tool steel
- Hammer is also Teflon-nickel plated for lubricity
- The lightweight, 6061 T6 alloy housing is anodized for superior durability
- Other components are EDM cut from A2 tool steel, then heat treated to RC 56-60 for long service life
- Trigger Module installs using your rifle's original hammer/trigger pins, no fitting or adjusting required
- Precision machined components ensure reliability and an excellent 3 lbs single stage trigger pull
- Each trigger is hand assembled, tested, and calibrated to the SCAR rifles at the factory
- Simple upgrade for the stock SCAR trigger
Big Book Catalog, Issue:71, Page:166
SPECS: Fits - SCAR 17S 308 Rifles.
When you need a rugged, hard-working, accurate rifle, the Browning X-Bolt is the ideal choice. Built to deliver precision accuracy, the button rifled, free float barrel has been triple checked for straightness and air-gauged to ensure a consistent diameter through the bore. The short 60° bolt lift is fast cycling and allows you to work the bolt quickly without the scope getting in the way. An adjustable, three-level Feather Trigger system provides a clean, crisp pull with no take up or creep and minimal overtravel. Top-tang safety is easily switched off and on while looking down a scope, and the bolt-unlock button allows you to cycle the rifle with the safety on. Proprietary recoil pad promotes a directional deflection of recoil forces, pulling the stock comb away from your face to reduce felt recoil and muzzle climb.
If the item is out of stock, Brownells will allow customers to backorder the item. However, the factory Browning does NOT allow us to backorder items. As soon as Browning has the part available and we are allowed to order the part, we will do so.
Norma Brass provides the serious reloader a premium grade, quality cartridge to reload. Norma Brass is bulk packed from the same lot. We try to keep a good supply of brass in inventory, but due to factory production and delivery delays, we may occasionally be out of some cartridges. Norma Brass is made to such exact standards that the cartridges typically include machined case heads, drilled (not punched) flash holes and close tolerance wall thickness.
Big Book Catalog, Issue:68, Page:543
Sinclair, Issue:5B, Page:120
All sets feature a bright red, fiber optic, front sight and fully adjustable peep or U-notch, rear sight. U-notch, rear sight sets use the highly accurate, 3-dot pattern with two green, fiber optic dots at the rear for sharp contrast and quick sight acquisition in all light conditions. No drilling or tapping required for most rifle models. Dovetailed front and rear sights may require minor fitting. For Marlin and Winchester lever action rifles.
Big Book Catalog, Issue:71, Page:308