Rugged, flip-up sights provide failsafe backup when your primary optic or red dot sight fails. Sight body flips up easily when you need it and locks securely in place under powerful spring pressure and two locking detent balls, so it can’t be accidentally bumped down until you hit the spring-loaded button on the left side of the base to retract it. Base clamps securely to any military or commercial Picatinny rail using a standard flathead screwdriver. No protruding knobs or levers to catch on brush, clothing, or other equipment. Sturdy, protective “ears” shield posts and apertures from impact. HK-Style Rear - two same-plane apertures: large .190" aperture provides a wide field of view for close-in targets, while .070" aperture is calibrated for engaging long-range targets. HK-Style Front - distinctive “globe” shape that aids in fast target acquisition under stress. Also available with a self-illuminating Tritium dot on the post for precise shot placement in low-light conditions.
AR-15, Issue:11, Page:068
Big Book Catalog, Issue:71, Page:074
SPECS: Rear - Stainless steel and aluminum, Black or Dark Earth finish. Rear Sights – All models 1.17” (3cm) long, 1.25” (3.2cm) wide, 1.85” (4.7cm) high extended. 1.8 oz. (52g) wt.
Front - Stainless steel and aluminum, Black or Dark Earth finish. M4/M16-Style Front – 1.17” long, 1.25” wide, 1.75” (4.5cm) high extended. 1.6 oz. weight.
.308 BUIS Kit includes a front and rear .308 BUIS Flip Up sight.
Front Flip Up Sight:
- Positively locks and opens.
- Uses a press detent to open the clutch and allow easy closure.
- Clutch provides firm but flexible resistance to endure mild obstructions while staying upright and completely closes under high pressure without breaking.
Rear Flip Up Sight:
- Designed for Rifle length rail and is marked for use up to 800 yards.
- Adjustment: Rear sight is 1/2 MOA Height Adjustment and 1/4 MOA Ambi Windage Adjustment.
- Aperture: Course sight is 0.125 / Fine sight is 0.0625.
- Features: Z Mark to designate Zero, Hand flip up and down, Attach to rail using flat head screw driver.
SPECS: Fits .308/7.62 Caliber Rifles., Weight: 0.278 Pounds / 0.126 Kilograms.
Rugged, Quick-Deploy Backup System; Minimal Profile When Folded
Spring-loaded sights deploy at the push of a button to provide instant backup sighting. Quick Deploy System locks securely and requires a firm, positive press of the button to deploy or retract the sight, so it won’t accidentally activate when bumped—these sights stay where you put them. Minimal profile when folded—only .435” high—with radiused edges and a smoothly curved front surface to prevent snagging on foliage, gear, or clothing. Crossbolt and side bar provide solid attachment to MIL-STD 1913 Picatinny or Weaver-style rail systems. All-aluminum construction is lightweight, yet plenty strong to handle the hard knocks of tactical operations, with a durable, scratch-resistant hardcoat anodized finish for extra surface strength. Set contains the front sight with ears and the two-position rear sight.
AR-15, Issue:11, Page:069
Big Book Catalog, Issue:71, Page:074
SPECS: Aluminum, hardcoat anodized, matte black. All models 1” (2.5cm) deployed length, 1¼” (3.2cm) wide, .435” (11mm) folded height. Front Sight w/Ears – 2-1⁄8" (5.4cm) folded length, 1.420” (3.61cm) deployed height from top of base to top of blade. Rear Sight – 2¼” (5.7cm) folded length, 1.425” (3.62cm) deployed height from top of base to center of aperture. Available with .065” or .200” peep hole or dual-aperture with both-size peeps.
LWRCI's new Skirmish Sights incorporate a host of practical features in an innovative new design. All the sharp edges on these ultra-low profile sights have been rounded to prevent snags and cuts to the operator, while the folded profile of the sight has been kept to only half an inch.
Both sights can be raised using gross motor skills. The sights lock securely in the up position and are lowered by pressing a button on their left sides. The sights are constructed for 7075 aluminum which is hard coat anodized and 4140 steel that is then treated with our NiCorr surface conversion technology. The 7075 aluminum is much harder and stronger than the 6000 series aluminum used in other manufacturers' sights. Additionally, the bearings and detents are all hard chromed making these sights nearly impervious to corrosion.
Mountable to any 1913 picatinny rail, the LWRC International Skirmish SIghts feature locking helicoil which requires no additional thread lock for installation and will stand up to thousands of rounds of recoil and rugged use.
One-piece front base, plus a fully adjustable ghost ring rear sight for Marlin lever guns. Hunters and competitive shooters alike will benefit from the faster sighting offered by the .191" and .230" inside diameter rear apertures and .100" wide, white line front sight blade. Ghost Ring sets include a rear ghost ring sight that mounts directly to the receiver without drilling and trapping.
Big Book Catalog, Issue:71, Page:310
SPECS: Steel, black, matte finish. 336/1894/30AS Ghost Ring Set - Fits Marlin 336, 1894, and 30AS with .700" c-to-c front ramp hole spacing.