The Nightforce X-Treme Duty Ultralite 1-Piece MagMount adds a third crossbolt for even greater protection against recoil.
The Nightforce X-Treme Duty Ultralite 1-Piece MagMount adds to the tough and reliable Nightforce Xtreme-Duty Ultralite Unimount and Magmount mounting systems, with titanium/aluminum construction providing the performance of steel at half the weight. The Compact Magmount requires less rail space than the traditional Magmount, and is available to fit 34mm riflescope tubes.
- Machined from heavy-duty aluminum
- Matte-black finish
- Height: 0.84 inches
- Fits standard Picatinny rails
Options available for the Nightforce X-Treme Duty Ultralite 1-Piece MagMount include both zero and 20 MOA of taper.
Promotional Codes are not applicable to Nightforce products.
Smooth Profile, Horizontal Split
The strongest small bore scope rings available. Designed to fit a very wide selection of rifles and fit both 3/8” and 11mm dovetails. This is made possible by using a solid steel asymmetrical reversible clamp that can be flipped 180° and used on wider or narrower dovetails for best fit. Features a 70/30 horizontal construction and are only 1/2” wide. Attachment is made to the dovetail using a single T-15 Torx style fastener and have 2 of the same fasteners for the ring top strap holding the entire package together securely.
Big Book Catalog, Issue:71, Page:269
SPECS: Steel, powder coated, black, matte or gloss finish. Height measured from top of base to inside, bottom of ring. Medium – .406" (10.3mm) nominal high. High - .525" (13.3mm) nominal high.
Give Uniform High-Strength Clamping Power
Steel caps with two screws per side provide extra strong, 4-screw, clamping power. Helps ensure that reticle stays square while tightening top screws. Large clamp nut locks rings to base, provides easy scope installation, removal; and accurate return to zero after re-installation.
Big Book Catalog, Issue:71, Page:274
Machined As A Matched, Serial-Numbered Pair For Precise Alignment
Heavy duty Picatinny rings are precision machined from solid aluminum billet as matched pairs to aid in obtaining the best possible alignment. Each pair is clamped together and the center holes bored to 30mm to tolerances of +/-.0014", then engraved with matching serial number. In addition, the lower halves are marked to prevent separation from their matched ring caps. All edges are beveled or radiused, including both sides of the steel ring nut, to minimize potential for snagging on other gear. Surfaces are blasted to ensure an even, matte finish, then hard anodized with a durable black finish for added strength and wear resistance. Crossbolt and nut are machined from chrome-moly steel, heat treated for exceptional strength, and blued. Steel, Torx® screws, four per ring, have matching finish. Separately available, precision-machined polymer inserts allow use of these rings with 1" diameter scope tubes.
Big Book Catalog, Issue:71, Page:263
“Ounces are pounds, Pounds are pain” The credo of the backcountry hunter. When tired legs are the only mode of transportation. When the air feels thin, and feet feel heavy. When months of preparation, training and sleepless nights thinking about the upcoming hunt culminate into a single moment, placing the crosshair where it needs to be for the perfect shot. Warne Mountain Tech is the ultimate lightweight precision scope mounting system. Don’t leave your dream hunt to chance. When every ounce matters, and every shot counts, Warne Mountain Tech are the scope mounts you can depend on.
- Precision CNC machined from 7075/T6 aluminum for a high strength & lightweight platform
- Mil-Spec hardcoat anodized finish for abrasion and corrosion resistance.
- Rings feature stainless steel hardware for “Element Proof” protection.
- Mil-Spec 65 in/lb., 1/2″ tactical nut attachments for securely clamping to the rail.
- Fits Picatinny & Weaver style mounts and are NATO-STANAG compatible.
Secure Picatinny Rings for Stable Scope Mounting
Badger Ordnance 34mm Scope Rings provide solid mounting of your optic to your rifle’s Picatinny scope base. Badger Ordnance 34mm Scope Rings are engineered for use with current optics on precision rifles with mid-weight profile barrels.
- Low (.915") rings made of 6061 T6 aluminum, hardcoat anodized
- Ultra High (1.49") rings made of ordnance grade steel, black oxide finish
- 4-screw caps
- Hefty crossbolts and hex head nuts
Engineered to exact specifications, the Badger Ordnance 34mm Scope Rings are optimized for superior strength without adding any extra bulk.
Unique Clamping System Ensures The Maximum Amount of Torque
100% machined, solid steel, scope rings use an innovative, built-in, radius clamp that gives you outstanding torque and a solid fit. When you tighten the large Torx screw, a convex extension on the moveable jaw is forced into a matching, concave recess on the ring for exceptional clamping power. Rings in each set are simultaneously machined and uniquely numbered for ultimate consistency between the pair. Skeletonized caps reduce weight, not overall strength. Fits Picatinny rails.
AR-15, Issue:05, Page:071
Big Book Catalog, Issue:71, Page:263
Sinclair, Issue:5A, Page:209
POS-ALIGN Pivoting Synthetic Inserts End Scope Misalignment
A highly versatile ring design that features a double dovetail front ring, while the rear ring fits a windage-adjustable rear base. Gives you a wilder range of windage setting without exceeding your scope's built-in adjustment, and preserves most of the Double Dovetail system's exceptional recoil resistance. Best if used with Burris Trumount Universal
Big Book Catalog, Issue:71, Page:262
Sinclair, Issue:5B, Page:205
Measurements are from the bottom of the scope tube to the bottom of the ring: 1"Med .270", High .390" 30mm Med .180", High .300", Extra High .420"
Same Rings the Marine Corps Uses on Their Designated Marksman Rifles
Badger Ordnance’s DMR 30mm Scope Rings were specifically designed for the USMC Designated Marksman Rifle and are optimized for use on the M14/M1A platform. They will work on any rifle with a MIL-STD 1913 Picatinny scope rail - an enough clearance for the scope’s objective bell.
Badger Ordnance DMR 30mm Scope Rings are machined from steel barstock as serialized, matched pairs, so they are truly as close to identical as technologically possible - unlike mass-produced rings. The benefit of matched rings is far lower risk of damage to your scope caused by misaligned rings.
- Sold in matched pairs
- Robust hex-head clamping nuts
- Torx-head ring cap screws
- Durable black oxide finish
- NSN #1005-01-521-0922
Built for strength and stability, Badger Ordnance Badger Ordnance DMR 30mm Scope Rings easily withstand the bumps and bangs of hard tactical operations OR the hunting field far from the comforts of home!