Upgrade your Surgeon or Remington 700 rifle with the speed, convenience, and added safety of a detachable box magazine. Perfect match with Surgeon receivers and replaces Remington bottom metal with minor fitting; short- and long-action models available. Install with the included bedding pillars for best accuracy. Performance features include a low-profile ambidextrous magazine release and beveled mag well to help ensure fast, positive mag changes. All exterior edges are rounded or beveled to eliminate sharpness that can abrade the hand or snag on sling, vegetation, or clothing. Precision machined from extra-strong 7075 T6 aluminum billet, hardcoat anodized for additional surface strength and corrosion resistance, with a matte black finish. Comes with a smooth-feeding Accuracy International 5-round magazine with rugged steel body, self-lubricating polymer follower, and tempered steel spring (additional magazines available separately). Includes two .625" O.D. aluminum bedding pillars and ¼"-28 tpi cap screws for ultra-secure installation.
Big Book Catalog, Issue:71, Page:184
SPECS: 7075 T6 aluminum, hardcoat anodized, matte black, with steel magazine, black oxide finish. Long Action (LA) - 15.1 oz. (428g) weight, including magazine. Fits Surgeon XL and Remington 700 long action.
Rugged, Reliable Backup Sighting; Same Height As Factory Iron Sights
Rugged, flip-up sights provide failsafe backup when your primary optic or red dot sight fails. Sight body flips up easily when you need it and locks securely in place under powerful spring pressure and two locking detent balls, so it can’t be accidentally bumped down until you hit the spring-loaded button on the left side of the base to retract it. Positions apertures at the same height as factory sights, simplifying integration of these sights on your rifle. Base clamps securely to any military or commercial Picatinny rail using a standard flathead screwdriver. No protruding knobs or levers to catch on brush, clothing, or other equipment. Sturdy, protective “ears” shield posts and apertures from impact. HK-Style Front - distinctive “globe” shape that aids in fast target acquisition under stress. Also available with a self-illuminating Tritium dot on the post for precise shot placement in low-light conditions.
AR-15, Issue:11, Page:068
Big Book Catalog, Issue:71, Page:074
SPECS: Stainless steel and aluminum, Black or Dark Earth finish. HK-Style Front – 1.17” long, 1.25” wide, 1.3” (3.3cm) high extended. 1.6 oz. (45g) weight.
Drop-In Part Helps Ensure Positive, Reliable Extraction
Tiny, high-stress synthetic rubber ring slips around the extractor spring to increase extractor tension for more reliable extraction. Eliminates spring "chatter" to prevent malfunctions caused by the extractor slipping off the cartridge rim. Helps ensure positive, consistent extraction during rapid-fire sequences.
AR-15, Issue:11, Page:038
Big Book Catalog, Issue:71, Page:041
SPECS: Synthetic rubber. Sold in a pak of 5.
Re-Engineered For Optimum Performance
Redesigned slide stop is machined from bar stock for strength and contoured for easy, reliable, positive operation. Features a long, wide finger pad with aggressive serrations for excellent traction, and a .200" diameter pin for secure lockup and smooth operation. The engagement surfaces contacting the magazine follower and the slide notch have been modified and optimized for performance, while the rear face is angled so the detent plunger keeps it positively in place under recoil until the magazine is empty.
1911, Issue:11, Page:009
Big Book Catalog, Issue:71, Page:104
SPECS: Carbon steel (CS), black oxide, matte black finish. Stainless steel (SS) , matte bead blast finish. Pad is .750"(1.91cm) long; .200"(.54cm) wide
Quick Lock, Quick Release Adjustment Lever For Harris S-Series Bipods
Easy-to-install lever replaces the knob on Harris S-series bipods, so you can release the tension, tilt the rifle to level the scope crosshairs, and then with a quick flick of the lever, lock it down so you’re ready to fire. Lightweight, fiber-reinforced nylon lever is easy to grasp and spring-loaded so you can reposition it to prevent snags without losing the tilt setting. Installs with simple hand tools. Instructions included.
Big Book Catalog, Issue:71, Page:363
SPECS: Lever - Fiber-filled nylon, black. Hardware – Carbon steel, blued. Approximately 2" (5cm) long, 13⁄8" (3.5cm) deep, 5⁄8" (1.6cm) wide. .6 oz. (17g) weight.
Nordic Components MXT magazine extension tube.
- MXT extension tube for changing magazine extension length and capacity
- Available in variety of lengths between +2 and +9 (shell capacity measured with 2 3/4″ shells and may vary with shells of differing length)
- Features relief groove to eliminate barrel clamp travel and ensure repeatable placement after disassembly
- Relief groove is not centered and can be relocated by reversing the tube (thread pitch the same on both ends)
- Includes ONLY MXT tube
- May require purchase of new magazine spring if you are changing the capacity of your existing extension
Click this link to find the attachment nut for your firearm: Extension Tube Nut
Big Book Catalog, Issue:71, Page:205
SPECS: +1, +2, +3, +3B (for flush fit on 18.5″ barreled Benelli M1, M2), +4, +5, +5B (for flush fit on 21″ barreled Benelli M1, M2), +6, +7, +7B (for flush fit on 26″ barreled Benelli M1, M2), +8, +8B (for flush fit on 28″ barreled Benelli M1, M2), +9.
TSR SL (Super-Low) Series Rings. Providing an extremely low mounting solution for those special applications Precisely machined with tolerances held to .0002", give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Mil-STD 1913 (Picatinny) bases.
Height measured from top of base to center of ring.
SPECS: 5/8" (15.8mm) wide. Height measured from top of base to center of ring.