Soft, Absorbent Cleaning Rags
Now, when you need the perfect, 100% cotton wiping or cleaning rag you won't have to reach for your favorite old "T" shirt. These high-quality, cleaning and wiping squares are knitted, not woven, from 5.3 oz., heavyweight cotton material that will not ravel, lint or string apart, even after repeated washings. Convenient 12" x 12" size is just right for polishing, cleaning, staining and finishing applications, plus shop cleanup and dusting. Highly absorbent right from the package, not treated with silicone or fillers; becomes even softer and more absorbent, wash after wash.
Big Book Catalog, Issue:71, Page:342
Big Book Catalog, Issue:71, Page:420
Big Book Catalog, Issue:71, Page:485
EGW Tikka T3 Scope Bases.
Add the versatility of a one-piece Picatinny scope rail with no drilling or tapping. Precision machined from extruded aluminum with Picatinny slot-and-rail spacing that allows fast and simple changes to eye relief, plus great flexibility in scope choice. Drilled to fit the factory scope mount holes on the gun’s receiver. Accepts Picatinny or Weaver scope rings. Lightweight Tactical mounts have a milled center channel for weight reduction. Full-width cross-slots are gauged to MIL-STD 1913 specs to +/-.002". Machined from ultra-rigid, extruded 6061 T6 aluminum. Includes socket head Torx® screws and wrench. EGW recommends 20 inch lbs of torque and a drip of blue loctite for mounting.
Big Book Catalog, Issue:71, Page:258
Stress-Proof Links To Fit Most Barrel/Frame Combinations
Set of six, stress-proof, hardened chrome-moly steel barrel links helps correct most barrel-to-frame fit and feeding problems on 1911 autos. Includes the following link sizes (measured center-to-center from barrel link pin hole to slide stop hole): factory standard #3 (.278"), as well as #0 (-.015"), #1 (-.010"), #2 (-.005"), #4 (+.005"), and #5 (+.010"). #0 is for Accurail-equipped guns with rails that have been moved down. #1-#5 also available separately.
1911, Issue:11, Page:008
Big Book Catalog, Issue:71, Page:103
Sinclair, Issue:1A, Page:008
SPECS: 4140 chrome-moly steel, heat treated to Rc 39-44, blued.
The XS Sights Shotail comes with a Picatinny rail, ghost ring rear sight and a banded standard dot Tritium front sight. The rear rail is constructed from anodized aluminum, and is compatible with Weaver or Picatinny rings & mounts. Rail is pre-drilled for standard Remington or Mossberg receivers. Ghost ring rear sigth is precsion machined from stress proof steel. Rear sight allows for windage and elevation adjustment. Banded front sight contains a standard Tritium dot front sight post, for high visibility in all lighting conditions. Easy installation, requires no gunsmithing. Fits on barrels that do not have a front sight base or sight rib.
Available for Remington 870 or Mossberg 500/590/930.
Big Book Catalog, Issue:71, Page:313
SPECS: Fits - Remington 870 or Mossberg 500/590/930. Construction - steel and aluminum. Drop-in installation. Front sight fits on barrels without a front sight post or sight rib.
Lets You Do Fast, Professional, No-Mar Pad Installation
One of the most difficult aspects of fitting a recoil pad has always been the final fitting of pad to wood because it is so easy to hit the stock with the disc, sanding strip, or file - and ruin the finish. The B&R Recoil Pad Fitting Jig removes the risk of stock damage by letting you finish the pad completely off - and away from - the stock.
The Jig is composed of two basic pieces: (1) an adjustable triangle on which the pad is mounted to be dressed to size, and (2) a universal support that attaches to the sanding disc table.
Operation is simple. First, cut the stock to the length and pitch required to fit the customer. Attach the pad to the stock, and sharply scribe the outline of the stock on the pad. Then transfer the pad to the base plate of the Jig, set the angle of pitch, put the Jig on its support, and dress the pad to the point of just removing the scribed line (this is necessary as the line was drawn outside the stock). Finally, test fit the pad to the stock and do any final dressing by hand, if needed. The lines of the stock are carried correctly into the pad - and you have a perfect fit!
The Jig eliminates all damage to the stock finish and reduces the entire pad mounting operation to a simple 15 minute exercise - making the job an easy and highly profitable one.
Big Book Catalog, Issue:71, Page:409
SPECS: Steel support is 20-1⁄4" (51.4cm) long. Steel triangle legs are approximately 11-1⁄4" (29.2cm) long. Aluminum base plate is 3-1⁄2" (9cm) long. Includes instructions.
New from Radian Weapons, the Raptor Ambidextrous Charging Handle for the DPMS G2 .308! The DPMS G2 .308 Raptor Ambidextrous Charging Handle works for other small frame .308 rifles as well, including Adams Arms SF 308 and Zev Technologies SF-MATEN.
- Machined from 7075-T6 aluminum
- Mil-Spec Type III Hard Coat anodized black finish
- Features same rugged durability and function as all other Radian Charging Handles
- Designed and manufactured in the USA
Provides A Helpful "Third Hand" During Gas System Maintenance
Compact, armorer-designed wrench enables fast, easy disassembly of key gas system components for proper cleaning. A handy gas plug holder serves as a “third hand” that retains the gas plug for easy access and keeps it from getting lost while working on the gas system. The “D”-shaped hole in the center of the wrench supports the gas piston while using a gas piston carbon removal drill bit. BAD-T3 includes gas cylinder lock wrenches for the Garand and standard M14/M1A, separate Garand and M14/M1A gas plug holders, and the gas piston holder. Designed exclusively for M14/M1A variants, the BAD-T4 has separate gas cylinder lock wrenches for the standard M14/M1A and the Smith Enterprise M14/MK-14, plus a gas piston holder and two gas plug holders that allow operation of the gas cylinder lock wrenches with the gas piston in place.
Big Book Catalog, Issue:71, Page:462
SPECS: Machined 7075 T6 aluminum, hardcoat anodized. 5¾" (14.6cm) long, 1½" (3.8cm) wide, 3⁄8" (9.5mm) thick.