Replacement sight sets give your 10/22® a longer sight radius for improved accuracy potential, plus the same sight picture as an AR-15/M16 with military-issue sights. Installation requires no gunsmithing, no drilling/tapping, and no permanent alterations to the rifle. Rear sight mounts using the factory-provided holes for a scope base. All-steel front sight assembly has a standard detent-locking M16 post surrounded by protective ears that guard it from damage and misalignment. User may substitute any aftermarket post that replaces the standard A2. For even greater precision, the TSR200 set’s rear sight has a single aperture that uses a rotating dial for fine adjustments in elevation; click adjustable for windage.
Big Book Catalog, Issue:71, Page:305
SPECS: Front Sight - steel, blued, matte finish, .53" (13.4mm) wide, .90" (23mm) high. Rear Sight - aluminum, black finish. 2.9" (7.4cm) long, .94" (24mm) tall. Sold as front/rear sight sets. Includes mounting screws.
Multi-purpose front sight works as a fully functional gas block, plus delivers lifesaving backup when primary optics fail or become hindered by low light or poor weather conditions. Machined, steel body features a spring-loaded pushbutton that locks sight in the deployed position. When not in use, simply depress the button and fold down for an unobstructed view through your optics. Protective ears guard the sight post from blows incurred during duty. Split, barrel clamp design allows easy mounting to standard contour barrels without removal of flash hiders or muzzle brakes. Hex cap screws pull clamping halves tight to barrel for complete sight immobilization when properly tightened. Durable, mil-spec, phosphate finish resists rust and corrosion. Includes bayonet lug and pivoting sling swivel that accepts tactical slings up to 1¼" wide. Rubber coating prevents swivel from rattling and giving away your position while on patrol. Heavy-duty, steel construction makes these emergency rear flip sights the tactical shooter’s choice for LE and military tasks requiring a compact, backup, sight system of superior strength and dependability. Deploys easily with the flick of your thumb; disengages down, out of your sight path when not in use by depressing the spring-loaded pushbutton. Extra thick, protective ears guard against blows that could potentially bend or break the sight post or aperture. Solid clamp with large crossbolt provides rock solid attachment to Weaver or Picatinny rail systems. Knurled and slotted, quick-release thumbscrew makes sight easy to install/remove. Rear Flip Sight's low-profile design attaches to A4 flattop receivers and regulates correctly with standard, M16/M4 front sights, as well as all Yankee Hill front sights. Rugged, steel base features an aluminum stem to keep weight to a minimum. Deploys instantly with thumb pressure. Large, knurled, screw head provides 1⁄2 M.O.A. windage adjustment. Includes flip-style aperture with .065" and .200" diameter peepholes for short- and long-range accuracy.
AR-15, Issue:11, Page:017
AR-15, Issue:11, Page:069
Big Book Catalog, Issue:71, Page:017
Big Book Catalog, Issue:71, Page:074
SPECS: Steel, phosphate-coated finish, dark gray. Front Sight - 1-7⁄8" (4.8cm) long, 1-3⁄16" (3cm) wide. Sight Post – 2¼” (5.7cm) high when raised. Fits standard, .750” diameter barrels. 6 oz. (170g) weight. Rear Sight – 1" (2.5cm) long, 1½" (3.8cm) wide, 1-3⁄8" (3.5cm) high when raised, 2.5 oz. (71 g) wt.
Glowing, Fiber Optic Dots For Faster Sight Pickup
Have the most popular sights on-hand for quick repairs and installations to get your customers back to shooting quickly! Handy kit contains red, fiber optic front sights in seven different heights and both narrow and medium base widths, plus two sights with red fiber optic rods for mounting directly on the barrel. Also included are two rear dovetail sights and two sets of six inch long, fiber optic rods for replacement and repair. Aluminum, rear sights with eye-grabbing, green, fiber optic dots really stand out in low light. They fit 3⁄8" dovetails and feature screw adjustment for elevation. Kit saves you approximately 50% over buying single beads. A perfect, money-saving kit for your shop.
Big Book Catalog, Issue:71, Page:306
Simplicity & Reliability of Classic Fixed Sights, Plus Functional Upgrades
Scalarworks Peak Iron Sights are for shooters who want the familiarity of classic AR-15 fixed sights, with upgrades to make them more suitable for modern tactical carbines. The Scalarworks crew designed the Peaks for a 15" sight radius, making them far more suitable for AR-15 carbine use than old "A2" sights designed for an M16A2 rifle’s 20" radius.
Peak Iron sights are manually adjustable for elevation (front) and windage (rear) in 1/2 MOA clicks. The front sight post is machined to the correct width for the 15" sight radius and its flat-face eliminates highlight bias. The rear sight’s peep presents a flat surface to the shooter as well to prevent distorting shadows and/or glare caused by the mil-spec A2 peep’s concave rear face.
- Machined 7075 T6 aluminum - far stronger than standard 6061 alloy
- Black Mil-A-8625 Type III hardcoat anodized
- 4140H steel hardware with Black Nitride finish
- 36mm (1.42") height over rail
- Front post: 1.35mm wide
- Rear flip apertures: 1.78mm (.07") and 5.08mm (.20")
As a bonus, Peak Fixed Sights are designed to sit 36mm above the rail, making them ideal as backup sights for an Aimpoint optic mounted on a Scalarworks Leap Mount (available separately). Mount a set on your carbine and see just how effective iron sights can be!
This sight and scope rail is designed for when something goes wrong. In case something happens to your primary sighting option, you have an “Ace in the Hole” – A backup aperture sight.
- Picatinny scope rail
- Rear 3/8 x .093 aperture has windage and elevation adjustment
- CNC machined out of high grade aluminum
- Includes steel fiber optic front sight.
All sets feature a bright red, fiber optic, front sight and fully adjustable peep or U-notch, rear sight. U-notch, rear sight sets use the highly accurate, 3-dot pattern with two green, fiber optic dots at the rear for sharp contrast and quick sight acquisition in all light conditions. No drilling or tapping required for most rifle models. Dovetailed front and rear sights may require minor fitting. High visibility, fast to pickup, sight systems for the Ruger® 10/22®. 3-Dot has U-notch rear blade with green dots, red front sight. Adjustable for windage and elevation.
Big Book Catalog, Issue:71, Page:308
All sets feature a bright red, fiber optic, front sight and fully adjustable peep or U-notch, rear sight. U-notch, rear sight sets use the highly accurate, 3-dot pattern with two green, fiber optic dots at the rear for sharp contrast and quick sight acquisition in all light conditions. No drilling or tapping required for most rifle models. Dovetailed front and rear sights may require minor fitting. For Marlin and Winchester lever action rifles.
Big Book Catalog, Issue:71, Page:308