Quickly Removable QD
Maxima Grooved Receiver Line of scope mounts are designed to fill the need of mounting scopes to rifles with an integrated receiver mounting rail. Because each manufacturer has their own proprietary mounting rail design, each ring model must be machined to exacting tolerances for proper fit and function. The Maxima Grooved Receiver line fulfills that need. The precision CNC machined Warne rings provide unsurpassed strength, durability and quality, and fit a variety of rifle models including Ruger #1, Ruger 77, Mini 14 & 30, and Ruger Blackhawk and Redhawk. The Maxima QD rings sport the unique Warne indexable lever system which allows the user to remove the optics from the rifle then reattach it without the loss of zero, as well as allowing the location of the lever to be indexed once the rings are affixed to the bases. After the levers are tightened, simply pull out on the lever, turn it to the desired location then let it snap into place.
Big Book Catalog, Issue:71, Page:270
SPECS: MIM Steel. Powder coat, Gloss black (Reg) or Matte black (Mat) in 1" (25.4mm) or 30mm (1.2") dia. Heights measured from top of base to inside bottom of ring. Medium: .460" (11.7mm). High: .585" (14.9mm).
Easy Installation & Removal; Heavy-Duty To Stand Up To Powerful Recoil
Precision-machined, tactical ring sets provide strong, rigid mounting to securely hold large diameter, 34mm scope tubes, like Schmidt & Bender, on hard-recoiling guns. Robust, hex clamping nuts and Weaver-style clamps lock rings tightly on Weaver and Picatinny mounts. Ring cap is secured with Torx screws. Each set is serial-numbered to guarantee a precision-matched pair. Available in 1", 1.125 and 1.275" ring heights, steel or aluminum depending on model.
Big Book Catalog, Issue:71, Page:262
Sinclair, Issue:5B, Page:210
SPECS: 1" & 1.125" – Steel, matte black oxide finish. 1.275" - MAX-Alloy aluminum, black, matte, anodized finish. Ring heights measured from top of base to inside center of rings. Available in 1" (25.4mm), 1.25" (2.9cm) and 1.275" (31.9cm) ring heights.
TSR "W" Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002", give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-style or Mil-STD 1913 (Picatinny) bases.
AR-15, Issue:11, Page:094
Big Book Catalog, Issue:71, Page:097
Big Book Catalog, Issue:71, Page:268
SPECS: Alloy Steel, black oxide finish to Mil-C-13924 standards. 5/8" (15.8mm) wide. Height measured from top of base to center of ring. 30mm - Low: .925" (23.5mm).
Choosing the Leupold PRW2 1" Weaver-Style Scope Rings for your rifle brings an unprecedented level of added strength, all while making the installation easier than ever. The rings are equipped with newly designed keeper systems that are simpler to install, and the rings themselves are machined from steel in the USA. The rings fit all QRW/PRW and other cross-slot bases on the market and are available in matte-black and gloss-black finishes, depending on ring height.
Big Book Catalog, Issue:71, Page:264
Absolutely The Strongest Ring Available
Leupold’s famous rotary dovetail rings in BOTH front AND rear bases; there’s no way a ring can shoot off its base. Ideal for large caliber, heavy kicking rifles that can throw a scope off easily, plus light caliber varmint rifles that need an absolutely rigid scope mount to make full use of the gun’s accuracy potential. Dual Dovetail Rings must be used together; will not interchange with other Leupold rings. Heights from Low for small scopes to Super High for giant objective bells. Sold in Pairs.
Big Book Catalog, Issue:71, Page:266
These machined steel ringmounts are an excellent, readily available alternative to rings sold by specific firearms manufacturers. Ringmounts are firearm specific and offer superior integrity because they are machined from solid stock. Available in 1" and 30mm, various ring heights and finishes
Big Book Catalog, Issue:71, Page:267
Sinclair, Issue:5B, Page:204
Now In Stainless Finish, Too!!
Heights: Low and Medium for scopes w/objective diameters to approximately 1.75"(44.45mm). High for objectives above 1.75". Extra High for scopes with objectives up to 60mm.
Big Book Catalog, Issue:71, Page:271