Mossberg 500/590/835/930/935 Safety Kit Brownells is actually my personal favorite everything introduced this week. Because pushing its unmatched getting pregnant, altered also now accommodated absolutely no over alone. And then on-line a broad selection of items it’s feasible obtain. The particular completely service or product is made through the use of exclusive things in which in some way possess excellent and fashion. Mossberg 500/590/835/930/935 Safety Kit Brownells is usually a preferent pick a lot of us. And I RECENTLY passionately suggest that. With all the outer first-rate touchstones, hence recognising this supplement any classy or perhaps not surprisingly long lasting. Many folks love currently the Mossberg 500/590/835/930/935 Safety Kit Brownells since many editions involving colorings, personas, resources.

 
 
Content:
Mossberg 500/590/835/930/935 Safety Kit Brownells. Includes the Brownells Enhanced Safety Button and the other parts in the safety system that get worn, dinged up, or lost. Replace ...
Mossberg 500/590/835/930/935 Safety Kit Brownells. by admin www.brownells.com

Shaped For Easy, No-Slip Operation; Made From Hardened Steel To Last

Includes the Brownells Enhanced Safety Button and the other parts in the safety system that get worn, dinged up, or lost. Replace everything at the same time to ensure smooth, positive, reliable operation of this critical component. Safety button screw also sold separately, so you don’t have to buy a whole new kit if the screw gets damaged during installation.


Big Book Catalog, Issue:71, Page:201

SPECS: Kit includes enhanced safety button, button screw, detent plate, detent ball, detent spring, and installation instructions. Fits Mossberg 500/590/835/930/935 shotguns.


Handgun & Shotgun Cotton Cleaning Swabs Hoppes. Soft and absorbent to carry fouling out or lubricants in. Handgun (H/G) and Rifle (R) are 8-32 thread; Shotgun (S/G) ...
Handgun & Shotgun Cotton Cleaning Swabs Hoppes. by admin www.brownells.com

Must Have Cleaning Accessories

Soft and absorbent to carry fouling out or lubricants in. Handgun (H/G) and Rifle (R) are 8-32 thread; Shotgun (S/G) are 5⁄16"-27 thread.


Big Book Catalog, Issue:71, Page:329


Ar-15 Ambidextrous Lower Receiver 5.56 Black Radian Weapons. Machined from billet 7075-T6 aluminum, the AX556 is a fully ambidextrous lower receiver for AR15-style firearms. In addition to the Talon ...
Ar-15 Ambidextrous Lower Receiver 5.56 Black Radian Weapons. by admin www.brownells.com

Machined from billet 7075-T6 aluminum, the AX556 is a fully ambidextrous lower receiver for AR15-style firearms.  In addition to the Talon Ambidextrous Safety Selector, left-side magazine release, and right-side bolt release, the AX556 features the patented A-DAC (Ambidextrous Dual Action Control), which allows right-handed shooters to easily lock the bolt to the rear without taking their hand off fire control.  To hold the bolt back using the A-DAC, simply pull the charging handle to the rear, depress the right-side magazine release button, then release the charging handle.  Other features and specifications include:

  • Billet machined 7075-T6 aluminum construction w/ integral trigger guard and flared magazine well
  • MILSPEC Type III hard anodized w/ Radian Black Cerakote finish
  • SART (Self-Adjusting Receiver Tensioner) spring-loaded plunger to reduce upper/lower wobble
  • Radian Talon 45/90 Ambidextrous Safety Selectors (long/short)
  • Enhanced Takedown Pin Set
  • All proprietary hardware included (enhanced bolt catch, left-side magazine release paddle, right-side magazine release button, right-side bolt release paddle)


Ar-15 Barrels 6.5 Grendel Heavy Profile Faxon Firearms. Straight flutes gives Faxon’s 6.5 Grendel Heavy Fluted Barrel a classic look target rifle look, while the 5R button rifling inside makes ...
Ar-15 Barrels 6.5 Grendel Heavy Profile Faxon Firearms. by admin www.brownells.com

Fluted Exterior Keeps Weight Down, Maximizes Airflow for Cooling

Straight flutes gives Faxon’s 6.5 Grendel Heavy Fluted Barrel a classic look target rifle look, while the 5R button rifling inside makes the most of the 6.5 Grendel round’s accuracy potential. Unlike traditional rifling, the lands and grooves are offset with 5R rifling, preventing bullet distortion as it travels down the bore.

Manufactured from high-grade 416R stainless steel at Faxon’s state-of-the-art Cincinnati, Ohio, facility, the 6.5 Grendel Heavy Fluted Barrel is nitride coated inside and out for resistance to corrosion and surface wear.

  • 18" & 20" lengths available
  • Gas port positioned for a mid-length gas tube for the 18", and rifle-length gas tube for the 20" barrel
  • 1-8" twist stabilizes a wide range of bullet weights
  • 11° target crowned muzzle
  • Comp/flash hider/brake/silencer-ready 5/8"-24 threaded muzzle

Like all Faxon barrels, each 6.5 Grendel Heavy Fluted Barrel goes through a battery of quality-control tests to ensure you install the finest possible barrel on your rifle.


Big Book Catalog, Issue:71, Page:020


Fixed-Blade Screwdriver Master Sets Brownells. We're tickled as all get out to offer our Fixed-Blade, Gunsmith's Screwdriver Set designed and developed by gunsmiths for those gunsmiths who ...
Fixed-Blade Screwdriver Master Sets Brownells. by admin www.brownells.com

We're tickled as all get out to offer our Fixed-Blade, Gunsmith's Screwdriver Set designed and developed by gunsmiths for those gunsmiths who love solid, fixed-blade screwdrivers that fit their gun screws right - and simply won't have it any other way!

THE PERFECT TIP & BLADE
We started with the tip of the blade, the part that has to fit the gun screw properly, and the most important part of a gunsmith's screwdriver. The blade tips are then custom, precision-ground in a crisply radiused, hollow-ground shape to give maximum strength. And, the ideal parallel section is ground at the tip to fit the screw slot properly through the full width and depth of the slot. (This is what keeps you from buggering screws - a blade tip that evenly distributes the turning torque applied at the handle to the full width and depth of the screw slot.) We made the blades short (you're only 2½" from the work piece) to give you maximum control, eliminate wobble and tilt. Yet, they are long enough to give you a good view of the work you are doing.

Tolerances are kept extremely tight for the entire blade, and the entire blade/shank is hardened to Rc 58-60 for proper, maximum strength and toughness in a screwdriver.

THE SHANK DESIGN
The long parallel shank maintains the same diameter as the width of the blade. This allows repeated regrinding’s and reshaping’s while still maintaining the original blade width. In addition, it allows the screwdriver to go into holes or recesses that are only screw-slot wide. The hex section allows you to use either an open-end wrench or one of the Midget Ratchets for more turning power on the heavier blades.

Finally, we put a size-sequence number - from 1 (smallest) to 20 (largest) on the hex section of each individual screwdriver so you can pick the size you want quickly.

HANDLE CUSTOM-DESIGNED FOR YOU
The handles are custom-made to our specifications to fit your hand well. They aren't too bulky, yet give a mighty good grip when large, tight screws have to be broken loose, and "fingertip" control when dealing with tiny, delicate screws. We use the same handle on all 20 screwdrivers to keep the same hand-fit and feel throughout the set.

DISTINCTIVE PRESENTATION BENCH BLOCKS
In keeping with the superb quality of the screwdrivers, we designed two magnificent Solid Oak Bench Blocks to hold your Fixed-Blade Gunsmith's Screwdrivers. They are real beauties. Each one has 3 tiers to make them compact, you can see both the width/thickness of the blade, the identifying number stamped on one flat of the exposed hex section and, the 20 holes (Master block) or 10 holes (Add-On block) are far enough apart for good finger room.

Every Bench Block is finished in a tough, non-gloss lacquer, and has anti-skid feet to keep it in place on your bench.

Finally, the Master Set Block includes a Personalized Name Plate for you to mount on your Bench Block, we have included the order form with each Block for you to choose which style of plate you want and the wording you would like. It's all paid for - and makes the Block perfect for awards or gifts, and just telling the world the Screwdrivers belong to you. The Add-On Block for the Super Master Set does not include the name plate.

SETS AVAILABLE
We've packaged the Screwdrivers two ways: The Master Set™ has all 20 Screwdrivers, plus the properly radiused Bit Shaping Stone, the Bench Block, and a bottle of Brownells Best Penetrating Oil™. To create The Super Master Set™ we took the Master Set and added 6 Allen head fixed blade screwdrivers, 3 Phillips "Anti-Cam" screwdrivers, and the Add-On Block. As with all our tools and supplies, they are guaranteed to please you, the most demanding craftsman in the world - the working gunsmith.


Big Book Catalog, Issue:71, Page:434

 

Stock #
Screwdriver #
Shank Dia.
Blade Thickness
#080-451-001
1
.120
.030
#080-451-002
2
.120
.040
#080-451-003
3
.150
.030
#080-451-004
4
.150
.040
#080-451-005
5
.180
.030
#080-451-006
6
.180
.040
#080-451-007
7
.210
.030
#080-451-008
8
.210
.040
#080-451-009
9
.240
.030
#080-451-010
10
.240
.040
#080-451-011
11
.270
.035
#080-451-012
12
.270
.045
#080-451-013
13
.300
.035
#080-451-014
14
.300
.045
#080-451-015
15
.300
.055
#080-451-016
16
.340
.040
#080-451-017
17
.340
.050
#080-451-018
18
.360
.040
#080-451-019
19
.360
.050
#080-451-020
20
.360
.060

 


Raven Limited Edition G19® Slide Gen 3/4 Zev Technologies. Available for a limited time only, the Zev Technologies Raven Limited Edition G19 Stripped Slide provides Glock® handgun owners with a unique ...
Raven Limited Edition G19® Slide Gen 3/4 Zev Technologies. by admin www.brownells.com

Designed to Deliver Increased Functionality

Available for a limited time only, the Zev Technologies Raven Limited Edition G19 Stripped Slide provides Glock® handgun owners with a unique opportunity to add a custom touch to their go-to polymer-framed pistol.

Each Raven Limited Edition G19 Slide is machined from 1704 stainless steel and features an all-black DLC coating for enhanced ruggedness. The slide is purpose-built for use in any kind of scenario, providing improved flexibility and functionality, thanks to a lowered ejection port and slide cut designed for a Trijicon RMR red-dot sight.

One of the other stand-out features of the Zev Technologies Raven Limited Edition G19 Slide is the inclusion of the company's Prizefighter slide cut, incorporating special cutouts designed to reduce the weight of the slide and increase cycling speed. The slide is designed for all Glock G19 Gen 3 and Gen 4 handguns.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H. The use of Glock on this page is merely to advertise the sale of Glock parts or components. As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.