Super-Thin Bits For Narrow, European-Style Slots
Eighteen incredibly thin bits to fit the extra-narrow screw slots often encountered in the gun shop. Take great care when using these bits. The blade MUST fill the slot from side-to-side and edge-to-edge or it will most certainly break on a firmly seated screw. Freeze spray, heat, penetrating oil, a few taps, regrinding the bit for an even better fit - all these tricks can help give success.
Big Book Catalog, Issue:71, Page:435
Sub-Assembly, Mil-Spec Parts Packaged In Money-Saving Kits
The easiest way to stock and sell genuine, mil-spec AR-15 parts, or use to assemble rifles on your receivers. Much lower in total cost than buying the parts one at a time. Kit contains only new, current-production, genuine, mil-spec parts; never pull-offs or direct-exchange surplus. Kit contains just the basic small parts plus an A2 pistol grip, with no trigger, hammer, or disconnector parts. Kit contents: A2 pistol grip, screw and washer; bolt catch, plunger, roll pin, and spring; magazine catch, button, and spring; selector, detent, and spring; front pivot pin and rear takedown pin; (2) takedown detents and springs; buffer retainer and spring; triggerguard and roll pin.
AR-15, Issue:11, Page:039
Big Book Catalog, Issue:71, Page:043
SPECS: Unassembled kit packaged in heat-sealed, poly bag, labeled for resale. Fits AR-15 only.
The MS1 padded sling is the latest addition to the Magpul line of rifle slings. By adding a padded section of variable-width tubular webbing to the already proven MS1 sling, this new product provides more comfort to the user when carrying heavy weapons. Other padded slings simply sew the pad onto or around an already existing sling. What Magpul has done is taken a section of variable-width webbing of our proprietary weave and stitched a high-grade, ripstop coated, closed cell foam pad to the inside of the sling. This ensures that the pad will never move inside of its housing and because the taper of the sling is woven, not stitched, the padded section has no known points of failure. By removing the structural stitching from padded slings, Magpul has created a sleek and streamlined solution that exceeds all others in durability and aesthetics.
AR-15, Issue:11, Page:070
Big Book Catalog, Issue:71, Page:251
Ideal For Scope Mounting
Keeps those single action and other problem screws from backing out during shooting. Restores worn parts to original tight fit. Flows into and fills to .015" gap, then hardens into tough solid with 1400 psi strength. Excess wipes off. Medium strength - disassemble with normal tools.
Big Book Catalog, Issue:71, Page:486
Durable Double Stack Mag for Glock?
Magpul’s latest PMAG 10 GL9 for the Glock® 17 is designed to provide the same quality of performance of the proven Magpul PMAG series of Glock® magazines while providing an alternative product to those in locations where magazines are restricted. The PMAG 10 GL9 is made of durable and lightweight polymer and is compatible with all standard, compact, and sub-compact 9mm Glock® handguns. To ensure proper feeding, the mag utilizes double stack geometry and is easily disassembled for cleaning.
- Capacity: 10
- Compatible with Magpul GL-L Plates for competition use
- Features a high visibility controlled tilt follower
- Corrosion resistant stainless steel spring
- May not be compatible with other platforms designed for use with Glock
The PMAG 10 GL9 for Glock® 17 is a great option when adding more magazines, whether it be for competition of everyday use. With each purchase, a portion of the proceeds go directly to pro-second Amendment organizations. Made in the USA.
The Ed Brown Ambidextrous Machined Tactical Thumb Safety provides a slim pad for use in tactical or concealed carry applications. This is the same as the Wide Ambidextrous Safety but with the levers trimmed to a 1/8" slender profile for better carry and concealment. This version is fully machined from stock for unbeatable quality and no chance of warping or porosity. This design uses a special hammer pin (included) to hold the safety securely, eliminating the need to modify the grips. Designed for all 1911 type frames and made from high quality steel. Available in blued or stainless steel. Requires minor gunsmith fitting for safe operation and includes complete instructions.
Big Book Catalog, Issue:71, Page:106
SPECS: Fits - All 1911 type frames.
Introducing the Brownell’s Retro A1 rifle length barrel assembly. Chambered in 5.56x45, the chrome lined barrel has a 1-12 twist and finished in black phosphate with an overall length of 20”. Muzzle threads are ½-28 and features a standard rifle barrel extension. The assembly includes a front sight base, .625 No F Marks, sight post, detent, spring, sling swivel, rivet, flat delta ring, barrel nut, weld spring, snap ring, and triangular handguard cap. Barrels are magnetic particle inspected. Machined from 4150 chrome moly steel. Everything you need for your Retro barrels!
Big Book Catalog, Issue:71, Page:018
The JP 9mm Bolt Assembly fits Colt 9mm style AR-15 and M16 rifles. This bolt has been tuned by JP to ensure consistent feed, extraction and ejection. Can be used in conjunction with the JP 9mm Silent Capture Spring, for the ultimate in tunability and smooth operation. The bolt features a matte black finish, and includes all internal combonents, composing of the firing pin, firing pin retaining pin, extractor and firing pin spring.
AR-15, Issue:11, Page:013
Big Book Catalog, Issue:71, Page:013
SPECS: Fits - 9mm AR Plateform designed to accept Glock® or Colt magazines.
FITS: AR-15 Accurized HBAR, .223; AR-15 Government Carbine, .223; AR-15 Match Target, .223; AR-15 Match Target Competition HBAR, .223; AR-15 Match Target Competition HBAR II, .223; AR-15 Match Target HBAR, .223; AR-15A3 Tactical Carbine, .2
AR-15, Issue:06, Page:092
AR-15, Issue:06, Page:093
AR-15, Issue:06, Page:094
Big Book Catalog, Issue:68, Page:602
Big Book Catalog, Issue:68, Page:603